This post will provide a simple solution guide for fixing a broken computer. Don’t worry, it is fixable and just a few simple steps need to be followed.

If you have an iPhone or iPad, be prepared for the possibility that your device will not recover data and it will be lost. This is especially true if you use a lot of cloud storage apps, such as iCloud, Dropbox, and Google Drive.

If your device fails to boot, there are a few things you can do to try and fix the problem. The most common cause of a failed boot is a corrupted bootloader, which can be caused by a number of different things. If you’re unable to fix the issue yourself, you can usually get help from your device manufacturer or an expert. ..

Brick is a versatile material that can be used in many ways. It can be used for walls, floors, and even roofs. Brick is also a very strong material and can last for a long time. ..

What is a Brick(ed) Device?

A brick device is a device that is not able to boot partially or completely. This can be due to some software error or installing third-party apps.

The device is no longer operational, so it’s being compared to a brick - a piece of a block with no use. ..

We have a solution for it and will discuss it further. The process to solve this problem is called Unbricking and the device we take here is a Realme Phone.

If you’re looking to unbrick your Realme phone, we’ve got the guide for you. Keep reading to learn how to do it the right way and avoid any problems.

Causes of Bricking?

A device has been bricked when the power supply fails, either due to a physical defect or an electrical problem.

Types of Bricking?

  1. The normal type where the phone just won’t turn on
  2. The more serious type where the phone is completely unresponsive The first type of bricking is more common, and usually happens when you accidentally drop your phone or when it gets wet. If you experience this type of bricking, try to turn off your phone and then turn it back on again as soon as possible. If that doesn’t work, then you may need to get a new phone.

A soft bricking device is a type of device that is not working properly and can be fixed with a few simple steps. In most cases, soft bricking can be corrected by following the steps below.

It is the condition in which the device is unable to boot completely or doesn’t switch ON. Causes 2,3,4 & 6 come under this category. These in most cases become difficult to correct and make the device operational.

How to Unbrick Realme Phone?

There is no proper official flash tool for the Oppo Realme device. Since Oppo is a sub-brand of Realme, we can try with tools that are suitable for Oppo too and vice versa.

There are a few methods to Unbrick Realme Phone, here we will be discussing using Fastboot Commands. If your phone is stuck on the Samsung logo and you have tried all the other methods, then you can try using Fastboot commands. ..

To boot into recovery mode on your device, please follow these steps:

  1. Power off your device.
  2. Hold down the Volume Down and Power buttons at the same time until you see the Android logo appear.
  3. Release the Power button and continue to hold down Volume Down until you see the Recovery Mode menu appear.
  4. Use the Volume Up button to select Recovery Mode and press the Power button to enter it.
  5. Once in Recovery Mode, use the cursor keys to select “Wipe Data/Factory Reset” and press the Power button to confirm.
  6. Select “Reboot System Now” from the Recovery Mode menu and press the Power button to restart your device. ..

Set up ADB and Fastboot

Android Debug Bridge (ADB) is a command-line tool that can be used to access each part of your Android device through the command line. ADB can be used to install and uninstall applications, view device information, and more. ..

A custom recovery is a tool used to flash TWRP recovery and also to unlock bootloaders. ..

If you have a newer Android device, like the Nexus 6P or Pixel 2, you can use fastboot to flash a new system image. This is useful if you want to try out a new ROM or if your device is having problems and you need to restore it to its factory settings. ..

The Android SDK is a small yet powerful tool that comes up with the Android SDK (Software Developer Kit) which is an alternative to all the recovery mode installations and updates. While re-flashing the system partition Fastboot requires a device with an unlocked bootloader. ..

Nexus devices that have enabled the fastboot mode by default can use a user-accessible Fastboot mode.

Some independent Android developers and tech enthusiasts have found a way to make Fastboot mode possible on some different phones. This allows them to flash custom ROMs and kernels without having to worry about the phone going into bootloader mode.

If you want to set up fastboot and ADB on your device, we have a comprehensive guide for you. Make sure to follow the instructions carefully to avoid any problems. ..

To install Android Debug Bridge and Fastboot, follow these steps:

  1. Open a command prompt and type “adb” followed by the path to your Android SDK installation. For example, if you are using SDK 8.0.0, type “adb -s 8.0.0” .
  2. Type “fastboot” followed by the path to your Fastboot installation. For example, if you are using Fastboot 1.3, type “fastboot devices” .
  3. If you have not already installed ADB and Fastboot on your device, do so now by following these steps:
  4. Type “adb devices” to list all of your device’s ADB and Fastboot devices .
  5. Type “adb reboot” to reboot your device into ADB and Fastboot mode .

Downloading Fastboot ROM Files

This is a very important step, before we take any steps we first need to extract the FastBoot ROMs on the system so that we are ready to run it.

To extract the compressed file, open a command prompt and change to the ADB directory: cd adb Then use the following command to decompress the file: adb decompress ..

Make sure that the boot.img, system.img, vbmeta.img, system.img and vendor.img files are all in the same location on your computer.

Booting into Fastboot Mode

  1. Connect your device to your PC using a USB cable.
  2. Open the command prompt and type “fastboot devices” to see the list of devices connected to your PC.
  3. If you don’t see any devices listed, try connecting your device to your PC using another USB port or by using an ethernet cable.
  4. Type “fastboot flash recovery recovery-4.0.0-signed” and press enter to start the process.
  5. If the process fails, try connecting your device to your PC using another USB port or by using an ethernet cable again.

Press and hold Volume Down & Power button together until the screen showing the Realme logo appears.Leave the buttons, now wait till black screen with a list of options appears.

I can’t get it to turn off. I’ve tried turning it off and on, But it keeps going into fastboot mode.

Unbrick Realme Phone Using Fastboot Command

  1. Boot the smartphone into fastboot mode by pressing and holding the Volume Down and Power buttons at the same time until the smartphone starts booting into fastboot mode.
  2. Connect the smartphone to the PC using a USB cable.
  3. Let’s go towards PC by clicking on “PC” in fastboot mode on the smartphone. Now that you have booted your phone into fastboot mode, you can connect it to your computer to perform various tasks such as flashing new firmware or recovering data. ..

adb devices If the device is connected properly, you will see a message like this in the Terminal: “Device connected.”

If the device returns a Device ID, then we are all set. Now, you need to format data from your device, for that type command as: and press Enter to execute. ..

FlashFile1.txt FlashFile2.txt FlashFile3.txt

  1. FlashFile1.txt
  2. FlashFile2.txt
  3. FlashFile3.txt

fastboot flash recovery recovery.img This will flash the recovery image to your device.

Executing the file will take approximately The time it will take to execute the file is approximately ..

Rebooting your device is a simple process using PowerShell. To reboot your device, type “reboot” in PowerShell and press Enter.

To reboot your device, press and hold the power button for about two seconds. ..

The device will reboot itself safely and uninterrupted. Now, disconnect your device from the computer safely.

To unbrick a Realme phone, follow these steps: set up your device as usual and you are done. ..

Closing Phrase

That was it, we successfully discussed and learned how to unbrick a Realme phone. Also, let us know whether you have successfully unbricked your device with our simple guide.

We would be happy to take up other methods and devices for you. ..