Causes of “problem with wireless adapter or access point” Error

There might be an issue with your Operating System, the network adapter might not be functioning properly, or there might be an issue from the access point end.

Your current security settings do not allow this file to be downloaded. To fix this, please follow these steps:

  1. Open the NVIDIA Control Panel.
  2. Click on the “Security” tab.
  3. Under “File download restrictions”, click on the “Edit” button.
  4. In the “Edit File Download Restrictions” window, click on the “Add…” button.
  5. In the “Add File Download Restriction” window, browse to and select the file you want to allow for downloading, and then click on the “OK” button. ..

If you are experiencing the “problem with wireless adapter or access point” error, it is likely that your wireless adapter or access point is not working properly. In this article, we have listed some of the best working solutions to fix the “problem with wireless adapter or access point” error.

Methods to Fix “problem with wireless adapter or access point” Issue

Method 1: Enter the Right Password

One common reason that leads to the access point error is typing a wrong password. Recall the right password and try to enter it in the ‘network security key’ section. Sometimes, even if the password is right, you might not be following the case-sensitive rule. So, try to check if you are typing the password as per case-sensitive or not.

Method 2: Check if the Wireless Adapter is On

If you accidentally turn on the ‘Airplane Mode’ on your devices, it can also be one of the reasons for the access point error. Try to check if the ‘Airplane Mode’ is on or not, and disable it if it is enabled.

Method 3: Try to Connect Using Ethernet Cable

If you are experiencing an issue with your Wi-Fi connection, it is recommended to try connecting using an ethernet cable. If that does not work, try connecting using a LAN cable to connect the LAN socket of your system with the router. Since most routers have multiple LAN ports, you can connect two different devices and test if the issue is popping up on both of them or not. ..

Method 4: Update the Wi-Fi Drivers

If you have a faulty network adapter, then the chances of getting problems with the wireless adapter are high. You either need to update the Wi-Fi drivers to the latest version or uninstall and reinstall them again.

  1. Open the Control Panel and click on the Wi-Fi icon.
  2. In the Wi-Fi Properties window, click on the Networking tab and then click on the Add Network button.
  3. In the Add Network dialog, enter your name and password for your Wi-Fi network and click on the OK button.
  4. Click on the OK button again to close the Wi-Fi Properties window.
  5. To update your drivers for your new Wi-Fi network, follow these steps:
  6. Open Control Panel and click on the Wi-Fi icon again.
  7. In the Wi-Fi Properties window, click onthe Networking tab and thenclickonthe Add Network button again.
  8. In the Add Network dialog, enter your name and password for your new Wi-Fi network andclickonthe OK button again to close theWi-Fi Properties window.
  9. Click onthe OK button again to close all of your current windows in Control Panel (except for Windows Update).

Now, open the ‘Device Manager’ option to see all the devices connected to your system. Navigate to the ‘Network Adapters’ option and expand it. Now, select the Wi-Fi adapter you wish to update.

Right-click on the adapter and select the ‘Update Driver’ option.

When you see a pop-up, click on the option ‘Search Automatically For Drivers’ to find drivers for your vehicle.

If the driver update is not completed, try to reboot the system.

Method 5: Reset Active Network Profile

Device profiles are a network connection-related setting that helps the device connect to the internet. However, this can vary from one device to another. If the configuration is not right for the active network, there will be an issue with the wireless adapter or access point. ..

  1. Open the Settings app on your iPhone or iPad.
  2. Tap on “General.”
  3. Tap on “Reset.”
  4. Enter your passcode if you have one, and tap on “Reset Network Settings.”
  5. Tap on “OK” to confirm the reset. ..

Type ‘cmd’ and press Enter. At the command prompt, type the following: cd C:\Windows\System32 type regedit and press Enter. In the Registry Editor window, navigate to the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management Right-click on the Memory Management key and select New > DWORD (32-bit) Value. Name this new value DisableSessionManagerMemoryEviction and set its value to 1. Close the Registry Editor window. ..

grep -v ‘^#’ /etc/passwd This will print the contents of the /etc/passwd file, including any passwords that have been set.

netsh wlan delete profile name=” Wi-Fi Network Profile Name” -C

If you have an issue with your wireless adapter, resetting your computer may help. ..

Method 6: Remove the Antivirus Sofware

Some antivirus programs detect wireless adapter drivers as malware and may disable them temporarily. If you experience problems with your computer after updating the drivers, try disabling the antivirus program for a while and then updating the drivers again. ..

Method 7: Change the Username and Password of your Network

If you are having trouble connecting to your Wi-Fi, try changing the username and password of your Wi-Fi connection. To change the credentials, you can refer to the manual provided by the router manufacturer.

If you can’t find the reset button on your router, you can try looking for the back of the router for more information on how to reset the username and password.

Method 8: Enable WMM on the Router

  1. Open the Settings app on your device.
  2. Scroll down to the bottom and select Wi-Fi and Bluetooth.
  3. Toggle on Wi-Fi Multimedia.
  4. Tap on the network you want to connect to and enter your password or username.
  5. Tap on the blue “connect” button to start using the Wi-Fi Multimedia tool on your device

Now, under the ‘Hardware’ tab, you will see a list of devices. On the left-hand side, you will see the name of the Wi-Fi adapter. On the right-hand side, you will see its ID number. To find out more about this Wi-Fi adapter, type its name into the ‘Name’ field and click on the ‘Properties’ button.

In the ‘Wi-Fi Adapter Options’ tab, you can change the settings for your Wi-Fi adapter. This includes setting the network name, password, and security type.

To use the WMM feature on your iPhone, first scroll down to find it. Then, select the ‘Auto’ option from the drop-down menu. ..

Method 9: Disable IP Helper

IP Helper is a Windows service that helps improve network connectivity. If the configuration is wrong, it might lead to the wireless adapter or access point error.

To disable the IP Helper service, follow these steps:

  1. Open the Control Panel.
  2. Under System and Security, click on the Networking and Sharing Center.
  3. Under Network Connections, right-click on the connection you want to disable and select Properties.
  4. On the General tab, under Protocols, select Disable all protocols.
  5. Click OK to save your changes and close the Properties window. ..

Now, open the ‘IP Helper’ service and enter your desired IP address.

Stop

After performing the steps above, your computer should be able to connect to the internet.

Method 10: Update Windows

Some people have reported that the old version of Windows is causing problems with their access point. So, if you’re having trouble connecting to your network, try updating your Windows version. ..

  1. Open the Start menu and type “cmd” and hit enter.
  2. Type “update” and hit enter.
  3. The update will start automatically and take a few minutes to complete.
  4. When it’s finished, you’ll be able to see the new Windows version in the taskbar under “Windows Update”.

If you’re using Windows 10, 8.1 or 8, you can check for updates and install them automatically. If you’re not using one of those versions of Windows, or if you want to choose which updates to install, follow these steps: Open the Windows search bar.Now, type “Windows Update Settings” in the search bar and open it.Check if there are any updates available to install. If there is any, select the updates you want to install and click on “Install”. ..

Conclusion

If you are experiencing problems with your wireless adapter or access point, there are a few things you can do to try and fix the issue. First, try using one of the methods listed above. If that doesn’t work, you can contact Microsoft’s technical support team for help. Alternatively, you can have your hardware checked by a skilled technician. ..