If your Nintendo Switch does not turn on even after a hard reset, there are several things you can do to troubleshoot the issue. First, make sure that your Nintendo Switch is plugged in to an outlet and that it is fully charged. If the issue persists, try resetting your Nintendo Switch by holding down the power button for 10 seconds. If that does not work, you can try taking your Nintendo Switch to a repair shop. ..

Why Won’t the Nintendo Switch Turn on Even After a Hard Reset?

If you know that the power button on your Nintendo console is working, but the console is not turning on, it may be a hardware issue. If the button does not work, it may be because there is not enough charge in the console to start up. There is also a possibility that there is an issue with the console itself.

The Nintendo Switch has a hard reset that can drain the battery. This can also be the primary reason for the console not turning on.

If your Xbox One console is not turning on, it is recommended to plug in the console and wait an hour. If the console still does not turn on, follow one of the following solutions:

  • Try pressing and holding the power button for 10 seconds.
  • Try restarting your Xbox One by pressing the power button, holding down the “restart” button, and then selecting “yes” when prompted to enter system recovery mode.
  • If you have a Kinect sensor, try plugging it in and turning it on. If you do not have a Kinect sensor, try plugging in an external hard drive or USB flash drive. ..

Methods to Fix Nintendo Switch Won’t Turn On After Hard Reset

  1. Reset the console to its factory settings. This will erase all your data and start from scratch.
  2. Clean the console’s interior and exterior with a mild soap and water solution, then dry it off completely.
  3. Remove any dust or dirt that may have built up on the console over time.

Method 1: Charge the Nintendo Switch Battery

One of the common reasons for the Nintendo Switch not turning on can be that the battery is low. To charge the battery, you need to charge it for at least 3 hours before you try to turn on the Nintendo Switch console.

The Nintendo Switch can be charged by either using a charging dock or the wall adapter. However, if you see the charging indication, it is safe to put the console in charging.

If the device is not turning on, try to charge the battery for an additional 3 hours.

Method 2: Try a Different Charging Dock

If the Nintendo Switch does not charge even after following the above method, it might be a cable problem. Check if any dust is accumulated around the Nintendo Switch’s charging port. ..

If the charging cable has any cuts or damage, then it might not work. Also, if you are using a non-Nintendo charger or cable, it might lead to the device’s malfunction.

If the outlet is faulty, it may not be able to power your devices. Try connecting it to a different outlet or remove the surge protector if you are using it.

Method 3: Try a Soft Reset

If the first hard reset did not work, then you can try to reset the AC adapter and the soft reset of the Nintendo console. ..

First, disconnect the AC adapter from the Nintendo console and the outlet.Now, leave the device unplugged for 30 seconds.Hold the power button of the Nintendo Switch on the top left for about 20 seconds and release it.Once again, press the power button to turn on the Nintendo Switch. ..

Method 4: Remove the SD Card

Resetting a console with an SD card installed can lead to data corruption. After the reset is complete, the SD card will be unreadable. ..

After you remove the SD card, try to reset it and see if it works.

Method 5: Perform Another Hard Reset

If the battery is working fine and the console is charged for at least an hour, try to perform a hard reset. For this, follow the steps given below: ..

  1. Disconnect the AC adapter and charging cable from the Nintendo console.
  2. Remove the SD card before resetting.
  3. Wait for at least 30 seconds after unplugging the charging cable before resetting the console.
  4. Press all buttons for 10 seconds until you see the Nintendo logo appear on screen, then release all buttons.
  5. The console goes into ‘Maintenance Mode’ and you will see two options: a) Reset All Game Data: This option will reset all game data on the console, including saved games and data associated with downloaded content (such as Miiverse posts). b) Delete User Data But Keep Game Data As Is: This option deletes user data but keeps game data as is, meaning any progress made in games will be lost if you choose this option.
  6. Select ‘Delete User Data But Keep Game Data As Is’ to reset your console and start from scratch with no saved games or data associated with downloaded content (such as Miiverse posts). ..

Conclusion

If you are still not able to turn on the Nintendo Switch, we recommend that you check if there is any physical damage to the device. If there is, then we would recommend that you take it to a nearby store or service center to have it fixed.

There are a few great gaming controllers for Mac that you can download and install. One is the Provenance emulator, which is available on iOS. Another great controller for Rocket League is the Xbox One controller. ..