If you are having trouble installing Windows 10, there are a few things you can do to try and fix the problem. First, make sure that your computer has the latest updates installed. Next, try reinstalling Windows 10 from scratch. Finally, if all else fails, you can try using a different USB drive or DVD to install Windows 10. ..

The 0x80300001 Error in Windows 10 can occur during the OS installation process. This error can be caused by a number of factors, including an incorrect installation file or driver, or by a problem with the BIOS. If you experience this error, you can try to fix it by following these steps:

  1. First, make sure that you have the latest version of Windows 10 installed. If you don’t have it, install it now.
  2. Next, open the Control Panel and select System and Security.
  3. Under System, click on the Advanced tab and then click on the Error Reporting tab.
  4. In thistab, click on the Check for Errors button and then click on the OK button.
  5. Now, open a command prompt and type “fixmgr”. This will fix any errors that may have been caused by the 0x80300001 Error in Windows 10 during the OS installation process.

What Causes 0x80300001 Error in Windows 10?

If you plan to install a 64-bit version of Windows 10 on any of the drives, apart from the C: drive, you might face the 0x80300001 error. ..

If you want to install Windows 10 on a different drive from where it is currently installed, you may encounter an error message that says “The operating system cannot be installed on this disk. Do you want to continue?” This error can be caused by a number of factors, including if the original Windows 10 installation was done using a USB drive or if the new drive does not meet the minimum storage requirements. ..

How to Fix 0x80300001 Error in Windows 10?

  1. Try to reinstall the operating system.
  2. Try to update the drivers.
  3. Try to clear the computer’s memory by pressing F8 during startup and selecting “memory” from the list of options that appears.
  4. Try to reset the computer’s BIOS by pressing F2 during startup and selecting “BIOS” from the list of options that appears. ..

Unplug the SATA Drives

If you have multiple SATA drives attached to the system, it is recommended that you remove them all and only use one to install Windows 10.

Removing removable USB devices and SATA drives can help avoid installation errors.

Use Windows DVD for Installation

To install Windows 10 without errors, follow these steps:

  1. Partition your hard drive.
  2. Insert the Windows 10 DVD into your computer and select the ‘Load Driver’ option.
  3. Choose the driver for your hardware and click OK.
  4. The installation will start automatically and you will be able to finish it without any problems. ..

When the message ‘Windows cannot be installed on this disk’ pops up, you can ignore it and go ahead with the installation process. If needed, re-insert the Windows installation DVD and click on the ‘Refresh’ option. Later, select the ‘Advanced Drive Options’ and make a new partition for the Windows 10 installation.

Remove All the USB Devices

If you have any USB devices connected to your computer, be sure to disconnect them before beginning the installation process. This will help avoid any potential problems during the installation. Additionally, make sure that all of your internal and external SATA drives are removed before beginning the installation process. This will help avoid any conflicts during the installation. ..

If you have any partitions in the drive, format them before installing Windows. Once the installation is done, remove the Windows installation USB and hit the refresh tab. ..

You can now continue with the installation by clicking the next button.

Modify the Booting Order

The issue for users not using the RAID option might be with the disk, which is not the booting disk.

If the CD or DVD you are trying to install is not the booting disk, you may see an error message of 0x80300001. To confirm if this is an issue with your disk or not, you will need to navigate to your BIOS and modify the boot order for installation. ..

The user needs to take the CD or DVD disk to the top of the computer and insert it into the drive.

Delete Any Extra Partitions on that Disk

Suppose you have a 500 GB SSD, and that SSD has two volume partitions, a 200GB for OS and the remaining ~300 GB for storage. To proceed with the Windows installation, you must delete the ~300 storage partition.

Once you have backed up the data, insert the Windows installation media and boot into the Windows installation wizard. When you are on the Partition Selection windows, you have to delete both the 200 and 300 GB SSD partitions. Once you delete the partitions, the disk will show you ~500 GB of unallocated space. You can now move forward with the Windows installation as usual.

Conclusion

Fix the 0x80300001 installation error on Windows 10: There are several solutions to fixing the 0x80300001 installation error on Windows 10. Follow the steps given above and let us know if there are any more hidden solutions. Thank you! ..

If you are having trouble connecting your USB drive to your computer, or if you are getting an error when trying to delete a file, follow these steps:

  1. Open Windows 10 and sign in.
  2. Click the Start button and type “usb” into the search bar.
  3. Click the usb icon that appears in the results list.
  4. On the right side of the window, under “Device Manager,” click “Universal Serial Bus controllers.”
  5. If you see a yellow triangle with a exclamation point next to it, this means that there is a problem with your USB drive and you will need to take it to a repair shop or replace it. If there is no yellow triangle with an exclamation point next to it, then your USB drive is working fine and you can continue with these steps.
  6. Under “Universal Serial Bus controllers,” click on the device name (for example, “USB Human Interface Device”) that corresponds to your USB drive and then click on the Properties button.
  7. On the General tab, make sure that the Path is set correctly and that it does not contain any spaces or special characters (for example, “/”). If everything looks okay on this tab, click on the Driver tab and make sure that both of the following boxes are checked: “Enable legacy support” and “Install from local media.”
  8. Click OK twice to close all of the windows on Universal Serial Bus controllers and return to Windows 10 desktop mode. If you are still having trouble connecting your USB drive or deleting files from it, please contact customer service for assistance at 1-800-Microsoft-Support (1-800-624-8255). ..